M.2 Heatsink Cooler 2280 SSD Double-Sided Heat Sink with Thermal Silicone pad for PS5/PC PCIE NVME M2 SSD(Black)
4.6Editor score
Aluminum alloy material
Double-sided clip design
Compatible with PS5
In this guide
Low profile SSD heatsinks are essential for preventing thermal throttling in modern NVMe drives. These compact cooling solutions fit inside tight enclosures while maintaining high performance under sustained load.
We evaluated ten leading models based on material quality, thermal conductivity, installation ease, and compatibility with devices like PS5 and laptops. Our selection prioritizes real world cooling gains and reliability.
Each pick below highlights specific strengths such as graphene layers or copper construction. Prices may fluctuate over time so check current listings before purchasing to ensure you get the best value.
Top 3 Picks for Best Low Profile SSD Heatsink
GLOTRENDS 2-Pack M.2 SSD Heatsink for 2280 NVMe/SATA SSD, Low-Profile
4.5Editor score
Wide M.2 compatibility
5 to 20 degree cooling
Tool-less installation included
be quiet! MC1 M.2 SSD Cooler Heatsink, Single and Double Sided 2280 modules
4.7Editor score
Efficient cooling performance
Fits double-sided modules
Ideal PS5 dimensions
Top 10 Best Low Profile SSD Heatsink in 2026 Compared
The following comparison table outlines the key specifications and dimensions of each low profile heatsink to help you choose the right fit for your specific system constraints.
ProductsSpecificationsEditor scorePrice
Editor's Choice
GLOTRENDS 2-Pack M.2 SSD Heatsink
Material: Aluminum
Dimensions: 22x70x3mm
Compatibility: 2280
Cooling: 5-20C
4.5Editor score
Editor's Choice
M.2 PCIE NVME 2280 SSD Graphene Coating Full-Cover Copper Heatsink
Material: Copper Graphene
Design: Stripe Pattern
Fit: PS5 Laptop
Thermal: High Conductivity
4.4Editor score
Best Premium
Laptop NVMe M.2 Heatsink with Nano Thermal Pads
Material: 100% Copper
Min Height: 1.5mm
Pad: 0.5mm 1mm
Mount: Rubber or Sticker
4.6Editor score
JEYI M.2 2280 SSD Heatsink, 0.5mm Ultra-Thin Graphene-Copper Thermal Film
Thickness: 0.5mm
Material: Graphene Copper
Cooling: 25C reduction
Size: 21x69mm
4.4Editor score
M.2 Heatsink Cooler 2280 SSD Double-Sided Heat Sink with Thermal Silicone pad for PS5/PC PCIE NVME M2 SSD(Black)
Material: Aluminum Alloy
Surface: Anodic Oxidation
Dimensions: 3×0.95×0.4in
Clip: Double-sided Design
4.6Editor score
M.2 Heatsink 67x18x1.5mm Pure Copper for Cooling 2280 M2 SSD NGFF NVMe Laptop
Material: Pure Copper
Size: 67x18x1.5mm
Pad: Silicone Included
Reduction: 5-20C
4.5Editor score
be quiet! MC1 M.2 SSD Cooler Heatsink, Single and Double Sided 2280 modules
Cooling: Efficient
Fit: Single Double Sided
Use: PS5 Expansion
Performance: Max Speed
4.7Editor score
M.2 Heatsink for PS5 PCI-E NVME 2280 SSD Graphene Coating Copper Heat Sink
Material: Graphene Copper
Dimensions: 70x20x4mm
Design: Air Duct
Fit: Laptop PC PS5
4.7Editor score
M.2 Heatsink, 75 * 23 * 0.5mm Pure Copper Heatsink Slim for Cooling 2280 M2 SSD NGFF SSD NVME SSD Laptop
Material: 100% Copper
Dimensions: 75x23x0.5mm
Fit: 2280 NVMe
Pad: Polished Surface
4.4Editor score
Micro Connectors M.2 SSD 5mm Low-Profile Heat Sink Compatible with PS5 and PC
Height: 5mm Low Profile
Material: Aluminum Alloy
Fit: 2280 SSD
Accessory: Silicone Rings
4.6Editor score
1. GLOTRENDS 2-Pack M.2 SSD Heatsink – Best Overall Low Profile SSD Heatsink
GLOTRENDS 2-Pack M.2 SSD Heatsink
Wide 2280 compatibility
Passive aluminum fins
Tool-less installation
Includes thermal pads
The GLOTRENDS 2-Pack M.2 SSD Heatsink is a top rated option with a 4.5 star rating. It offers wide compatibility for 2280 NVMe and SATA drives including PS5 expansion slots.
Pros
- Fits PS5 and desktop
- Cuts peak temps by 20 degrees
- 2 pack value
- No screwdriver required
- Protects drive investment
Cons
- Not for laptops
- Simple aluminum design
We may earn a commission when you buy through this link, at no additional cost to you.
Its passive aluminum fins pull heat off the controller effectively reducing peak temperatures by 5 to 20 degrees under load. This prevents throttling during big file transfers and game installs.
Installation is toolless with metal clasps or rubber bands holding the heatsink in place. The kit includes two low viscosity thermal pads to ensure safe contact without damaging the drive.
This heatsink is ideal for desktop builds and PS5 users who need reliable cooling without noise. It protects your drive investment by keeping the controller within a safe operating temperature zone.
Wide M.2 Compatibility
This model fits every 2280 M.2 SSD whether NVMe or SATA. It supports Gen3 to Gen5 speeds making it a future proof choice for most storage needs.
Complete Kit Features
The package includes two aluminum heatsinks four metal clasps and four rubber bands. It also comes with a user manual to guide you through the quick installation process.
We may earn a commission when you buy through this link, at no additional cost to you.
2. M.2 PCIE NVME 2280 SSD Graphene Coating – Best for High Conductivity Cooling
M.2 PCIE NVME 2280 SSD Graphene Coating Full-Cover Copper Heatsink
Graphene coating material
Stripe pattern design
Professional air duct
Fits laptop and PS5
This graphene coated copper heatsink delivers high conductivity for efficient heat transfer. It is designed with a stripe pattern that looks great while ensuring your drive stays cool during heavy use.
Pros
- High thermal conductivity
- Aesthetically pleasing
- Easy silicone pad fix
- Dissipates heat quickly
- Protects SSD particles
Cons
- Priceier than aluminum
- Check dimensions carefully
We may earn a commission when you buy through this link, at no additional cost to you.
Graphene is an extremely efficient heat conductor which helps lower temperatures significantly compared to standard aluminum. The air duct design increases contact area with air for faster heat exchange in tight spaces.
Installation is straightforward using a silicone thermal pad that secures the radiator without tools. This method prevents damage to the SSD surface and protects the particles extending the life of your drive.
Ideal for laptops and PS5 builds this radiator combines style with performance. Test temperatures before and after installation to confirm the cooling gains in your specific environment.
Superior Material Technology
Graphene thermal conductivity can reach 5300W/mK which is far higher than pure copper or aluminum. This allows for much faster heat dissipation from the SSD controller.
Sleek Design
The slanted slot design provides a more aesthetically pleasing installation display. It looks professional inside visible bays while maintaining a low profile for narrow spaces.
We may earn a commission when you buy through this link, at no additional cost to you.
3. Laptop NVMe M.2 Heatsink – Best for Compact Laptop Spaces
Laptop NVMe M.2 Heatsink with Nano Thermal Pads
100% copper material
Min height 1.5mm
Unique thermal pads
Rubber or sticker mount
Designed for the compact space of laptops this 100% copper heatsink provides effective thermal management. It features a minimum installation height of just 1.5mm making it perfect for thin notebooks.
Pros
- Polished copper finish
- Fits ultra-thin laptops
- Cooling effect 10-20C
- Two mounting methods
- Universal fit for laptops
Cons
- Thin profile is fragile
- Pad thickness varies
We may earn a commission when you buy through this link, at no additional cost to you.
The polished copper construction ensures high performance heat dissipation. It cools your M.2 SSD by 10 to 20 degrees to avoid overheating and throttling during demanding tasks.
Installation can be done using rubber rings or high temperature insulation stickers depending on your laptop layout. Unique 0.5mm and 1mm thick thermal pads adapt to uneven surfaces on the drive.
This is a reliable choice for laptop users who need to prevent thermal throttling without modifying the chassis. Check your laptop clearance before purchasing to ensure a proper fit.
Copper Material
100% copper cut and polished ensures high performance thermal conduction. Copper transfers heat more efficiently than aluminum making it suitable for high output SSDs.
Flexible Mounting
Two mounting methods including rubber ring and sticker allow you to choose what fits your laptop best. This flexibility makes it easy to secure the heatsink without tools.
We may earn a commission when you buy through this link, at no additional cost to you.
4. JEYI M.2 2280 SSD Heatsink – Best Ultra-Thin Solution
JEYI M.2 2280 SSD Heatsink
0.5mm ultra-thin
Graphene copper film
Dual-sided cooling
Fits PS5 slots
The JEYI M.2 2280 SSD Heatsink is an ultra-thin option ideal for very tight spaces. It uses graphene and copper foil materials to deliver high efficiency cooling in a slim package.
Pros
- Ultra-thin design
- High thermal conductivity
- Reduces temps by 25C
- Adhesive resistance range
- Universal compatibility
Cons
- Requires careful handling
- Film can bend
We may earn a commission when you buy through this link, at no additional cost to you.
This film reduces SSD peak temperatures by 25 degrees under load. Its 0.5mm thickness perfectly fits compact spaces like PS5 and ultra-thin laptops where other heatsinks might not fit.
Dual-sided cooling options let you apply thermal pads to both sides of your SSD for doubled heat dissipation. The adhesive temperature resistance range is broad ensuring permanent bonding with zero fall-off.
Be careful when handling this film as it can bend. Gently bend it back flat if needed. Proper contact is essential for effective cooling so follow instructions carefully during installation.
Ultra-Thin Design
At only 0.5mm thick this heatsink is perfect for ultra-thin laptops and PS5 slots. It maximizes cooling in the tightest internal spaces without raising the drive height significantly.
Universal Compatibility
Compatible with laptop SSDs ROG ally 2280 adapters desktop SSDs and PS5 expansion slots. It fits 2280 SSDs perfectly making it a versatile choice for many users.
We may earn a commission when you buy through this link, at no additional cost to you.
5. M.2 Heatsink Cooler 2280 SSD Double-Sided Heat Sink – Best Budget Low Profile SSD Heatsink
M.2 Heatsink Cooler 2280 SSD Double-Sided Heat Sink
Aluminum alloy material
Anodic oxidation surface
Double-sided clip
Dimensions 3×0.95×0.4in
This double-sided heatsink offers excellent value for desktop PC and PS5 users on a budget. It features an aluminum alloy body with silver plating to eliminate static electricity effectively.
Pros
- Affordable option
- Eliminates static electricity
- Good thermal pads
- Reduces temps by 20C
- Stable installation
Cons
- Silver plating may wear
- Not for double-sided
We may earn a commission when you buy through this link, at no additional cost to you.
The double-sided clip design is suitable for M.2 NVME SSD of various heights ensuring a stable installation. It cools your M.2 2280 SSD by 10 to 20 degrees to avoid overheating.
Thermal pads included have good conductivity ability and low viscosity. They do not damage the M.2 SSD and provide good heat dissipation performance for steady data transfer speeds.
This model is perfect for those who want reliable cooling without spending much. It improves computer performance by preventing thermal throttling and protects your drive during sustained usage.
Material Benefits
Aluminum alloy with silver plating helps eliminate static electricity. Anodic oxidation surface treatment ensures durability and a long service life for the heatsink body.
Double-Sided Design
The double-sided clip design makes installation easy and stable. It protects your M.2 SSD while providing good heat dissipation performance for consistent speeds.
We may earn a commission when you buy through this link, at no additional cost to you.
6. M.2 Heatsink 67x18x1.5mm Pure Copper – Best High Efficiency Metal
M.2 Heatsink 67x18x1.5mm Pure Copper
100% pure copper
Groove design
1.5mm thickness
67x18x1.5mm size
This pure copper heatsink adopts high quality material for efficient heat transfer. The groove design greatly increases the heat dissipation area allowing accumulated heat to be released faster.
Pros
- More efficient than aluminum
- High thermal conductivity
- Increases dissipation area
- Flexible installation
- 100% satisfaction guarantee
Cons
- Slightly heavy for thin laptops
- Check space before buy
We may earn a commission when you buy through this link, at no additional cost to you.
Thermal conductivity of copper is much more efficient than aluminum alloy. A silicone thermal pad is included to maximize heat transfer and provide flexibility in installation on the SSD.
Its 1.5mm thin design can be installed on most computers without interference. It cools your M.2 SSD by 5 to 20 degrees maintaining reliable data transfer speed.
Widely applicable to notebook PCs and desktop computers it works as a heat sink for precision equipment. If you have issues the seller offers a satisfaction guarantee with support.
High Compatibility
This heatsink is compatible with M.2 2280 SSD. It also works with other heat generating devices like PS5 Nintendo Switch and smartphones for versatile cooling.
Satisfaction Guarantee
The seller is committed to providing high quality products and service. If you have issues they reply within 24 hours to resolve problems or provide a refund.
We may earn a commission when you buy through this link, at no additional cost to you.
7. be quiet! MC1 M.2 SSD Cooler Heatsink – Best Premium Low Profile SSD Heatsink
be quiet! MC1 M.2 SSD Cooler Heatsink
Efficient cooling
Fits single and double
PS5 compatible
High performance
The be quiet! MC1 M.2 SSD Cooler Heatsink is a premium option known for efficient cooling. It enables maximum read/write speed by keeping the SSD at lower temperatures.
Pros
- Maximum read/write speed
- Lower temperatures
- Ideal PS5 dimensions
- Extended full performance
- Shorter loading times
Cons
- Higher price point
- Basic design
We may earn a commission when you buy through this link, at no additional cost to you.
It fits both single and double sided M.2 2280 modules providing versatile support for modern drives. This allows your SSD to run at full performance for an extended timespan.
Its ideal dimensions make it suited perfectly for PlayStation5 expansion slots. This helps provide the necessary cooling power for extended memory reducing loading times and increasing free space.
This heatsink is recommended for users who want reliability and optimal performance. It ensures your drive stays cool and responsive even during heavy gaming or professional workloads.
Ideal PS5 Dimensions
Thanks to its ideal dimensions this heatsink is suited perfectly for PlayStation5 expansion slots. It provides the cooling power needed to maintain performance after upgrading storage.
Extended Performance
Lower temperatures allow the M.2 SSD to run at full performance longer. This prevents throttling and ensures consistent speeds for games and applications.
We may earn a commission when you buy through this link, at no additional cost to you.
8. M.2 Heatsink for PS5 PCI-E NVME 2280 SSD Graphene Coating – Best Graphene Radiator
M.2 Heatsink for PS5 PCI-E NVME 2280 SSD Graphene Coating Copper Heat Sink
Graphene copper material
Dimensions 70x20x4mm
Air duct design
Thermal pad included
This graphene copper radiator is a high performance solution for PS5 and PC NVMe SSDs. Its graphene coating offers superior conductivity making it more efficient than standard radiators.
Pros
- High thermal conductivity
- Increases contact area
- Stylish slanted slots
- Protects particles
- Dissipates quickly
Cons
- Thicker than ultra-thin
- Requires alignment
We may earn a commission when you buy through this link, at no additional cost to you.
The professional air duct design increases the contact area with air for heat exchange. It dissipates heat more quickly allowing your drive to stay cool under sustained load.
The slanted slot design provides a more aesthetically pleasing installation display. A silicone thermal pad helps you fix the radiator on SSD easily without any tools required.
It protects the particles of the SSD preventing damage and extending life. Check the dimensions to ensure it fits your specific narrow spaces before purchase.
Air Duct Design
The radiator increases contact area with air for better heat exchange. This design helps dissipate heat quickly improving the overall thermal performance of the SSD.
Aesthetics
The slanted slot design provides a more aesthetically pleasing installation display. It looks clean and professional inside your console or computer case.
We may earn a commission when you buy through this link, at no additional cost to you.
9. M.2 Heatsink 75 * 23 * 0.5mm Pure Copper Heatsink Slim – Best Slim Copper Heatsink
M.2 Heatsink, 75 * 23 * 0.5mm Pure Copper Heatsink Slim
Pure copper material
Size 75x23x0.5mm
Polished pad surface
Complete package kit
This pure copper heatsink adopts high quality material for efficient cooling. Its exact dimensions prevent installation misalignment and short circuits ensuring safety for your drive.
Pros
- High quality copper
- Exact dimensions prevent short circuits
- Prevents oxidation
- Includes tools and screws
- Wide compatibility
Cons
- Package items vary
- Check exact dimensions
We may earn a commission when you buy through this link, at no additional cost to you.
The thermal conductive pad has undergone chemical polishing with a smooth surface and no burrs. It resists oxidation and prevents rust for a long service life.
The package includes a copper heatsink thermal pads and tools like a screwdriver and spudger. It is compatible with various laptops desktop computers and PS5 SSD slots.
Its 100% satisfaction guarantee ensures you can buy with confidence. Contact the seller within 24 hours for any issues regarding damage or missing items.
Exact Dimensions
The exact dimensions prevent installation misalignment and short circuits. This precision ensures the heatsink fits securely and protects your M.2 SSD from damage.
Package Contents
Includes copper heatsink silicone thermal pads screwdriver triangular plastic spudger and M2 SSD screws. This complete kit makes installation straightforward for any user.
We may earn a commission when you buy through this link, at no additional cost to you.
10. Micro Connectors M.2 SSD 5mm Low-Profile Heat Sink – Best Low Profile for PS5
Micro Connectors M.2 SSD 5mm Low-Profile Heat Sink Compatible with PS5 and PC
5mm low profile height
Cross-cut aluminum fins
Heat resistant rings
Easy thermal pad install
The Micro Connectors M.2 SSD Heatsink is designed specifically for low profile needs. Its 5mm height allows it to work around tight spaces without interfering with other components.
Pros
- Low profile 5mm
- Optimal heat dissipation
- Compatible with PS5
- Works on M.2 adapters
- Heat resistant silicone
Cons
- Limited to 5mm height
- Basic aluminum build
We may earn a commission when you buy through this link, at no additional cost to you.
Cross-cut aluminum alloy fins provide optimal heat dissipation for your NVMe drive. It works on motherboards or M.2 adapters making it versatile for different system configurations.
Heat resistant silicone rings are included to secure heat sinks effectively. This helps the heatsink stay in place during shipping or transport without shifting.
Ideal for PS5 M.2 NVME storage upgrades it fits standard 2280 lengths. It is a reliable choice for users needing compact cooling solutions for consoles or small PCs.
Low Profile Height
The 5mm low profile height allows it to work around tight spaces. It fits inside tight enclosures where taller heatsinks might not fit properly.
Accessory Inclusion
Heat resistant silicone rings are included to secure heat sinks. This ensures the heatsink stays stable during transit or operation.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best Low Profile SSD Heatsink
Selecting the right heatsink requires considering dimensions, materials, and compatibility with your specific system build.
Material and Thermal Conductivity
Materials like copper and graphene provide better thermal conductivity than aluminum. Copper transfers heat more efficiently which is ideal for high-speed drives but can be heavier.
Choose a material that balances weight and performance for your build. Look for graphene coatings if you need maximum cooling in a slim profile.
Dimensions and Clearance
Check your device clearance before purchasing. For PS5 or laptops ensure the height does not exceed the allowed limit. Most low profile options are under 5mm thick.
Measure your slot height to avoid conflicts. A heatsink that is too tall may not close properly on a console.
Installation Method
Some heatsinks use screws while others use rubber bands or adhesive. Tool-less options are faster but might be less secure for portable use.
If you prefer a stable fit screws are best. For PS5 use a model designed for that slot.
Thermal Pad Quality
Thermal pads ensure contact between the drive and heatsink. Good conductivity pads reduce resistance and improve cooling.
Look for low viscosity pads to avoid damaging the SSD.
Compatibility
Ensure the heatsink supports 2280 drives which are the standard size. Some models may also support single-sided or double-sided configurations.
Check product details for specific model lists like SN750 or 970 EVO.
Durability
Metal bodies resist wear better than plastic. Look for anodic oxidation treatment to protect against corrosion.
Quality construction ensures the heatsink lasts long under heat stress.
How to Use and Care for Your Low Profile SSD Heatsink
Start by powering down your system and unplugging it completely. Open the case or console cover to access the M.2 drive securely.
Apply the thermal pad to the controller area if it is not pre-attached. Place the heatsink on top and secure it with screws or clasps to ensure contact.
Check that the heatsink is flat and aligned properly. Periodically clean dust from fins to maintain airflow and cooling efficiency over time.
Frequently Asked Questions
Why is cooling important for M.2 SSDs?
Cooling is important because NVMe drives can throttle and reduce speeds when they overheat. A heatsink maintains performance during long transfers or gaming.
What is the best material for an SSD heatsink?
Copper and graphene are excellent materials for thermal conductivity. Aluminum is lighter but less efficient. Choose based on your space needs.
How much temperature reduction can I expect?
Most low profile heatsinks reduce peak temperatures by 5 to 20 degrees under sustained load. The exact gain depends on airflow and drive load.
Are these heatsinks compatible with PS5?
Many models in this list are designed specifically for PS5 expansion slots. Always check the dimensions to ensure they fit the internal clearance.
Do I need a fan for these heatsinks?
No these passive heatsinks do not need fans. They rely on airflow and material conductivity to dissipate heat silently without adding power draw.
Can I use a laptop heatsink on a desktop?
Yes as long as the dimensions match. Desktops often have more space so thin laptop models work well if they fit the slot.
How do I install the thermal pad?
Peel the protective film carefully and place it between the SSD and heatsink. Ensure full contact without air gaps for best transfer.
Final Thoughts on Choosing the Best Low Profile SSD Heatsink
Our top picks include the GLOTRENDS 2-Pack for value, the M.2 Heatsink Cooler for budget, and the be quiet! MC1 for premium performance.
Prioritize dimensions and material when buying to ensure your drive stays cool. A good heatsink protects your investment and maintains high transfer speeds.
Prices may vary so check current listings before purchasing to secure the best deal for your system.